- 80A high inrush current changeover relay with potential free contacts
- for switching capacitive, inductive or resistive loads
- standalone mode: in standalone mode a push-button connected to the input operates the relay
- momentary or toggle mode can be selected by toggling the slide switch on the back
- Velbus mode: in Velbus mode the module is connected to a Velbus domotics system
- the relay and input are used as Velbus output and input channels
- firmware upgradeable through the Velbus system
- CAN terminator switch with state detection
- bus error state indicated by led flashes
- detection of power supply undervoltage indicated by led flashes (standalone and Velbus mode)
- fire retardant ABS case with cuttable mounting brackets for screws and m3 bolts
- leds for power supply, Rx (Receive), Tx (Transmit) and relay status
Specifications
| Product basic info |
|---|
| Instruction manual languages | Dutch, English, French |
| Primary colours | Black |
| Additional colours | Green |
| Depth unit | 19 mm |
| Height unit | 37 mm |
| Width unit | 57 mm |
| Weight unit | 35 g |
| Material | Fire-resistant ABS |
| Detailed information | - Maximum capacitive current at 230 VAC 6 A
- Maximum current consumption 50 mA
- Maximum inductive current at 230 VAC 6 A
- Maximum resistive current at 230 VAC 10 A
- Maximum resistive current at 30 VDC 10 A
|
| Physical properties |
|---|
| Number of channels | 1 |
| Technical data |
|---|
| DIN rail | |
| Protocol | Velbus |
| Programmable timer functions | |
| Number of modes | 2 |
| Environmental data |
|---|
| IP rating | IP10 |
| Operating temperature range | -10-50 °C |
| Operational properties |
|---|
| Possible address | 250 |
| Potential free contacts | |
| Connections |
|---|
| Wire size mm² | 1.5 mm² |
| Power supply |
|---|
| Maximum output voltage rating VAC | 230 V |
| Input voltage rating VDC range | 12-18 V |
| Maximum output voltage rating VDC | 30 V |
¡Aún no hay comentarios de usuarios!
